Review on: Preparation and Evaluation of Paracetamol Emulsion dosage Form

Alok Kumar; Gulafshan Parveen

doi:10.55544/jrasb.1.5.9

Authors

Alok Kumar Research Scholar, Department of Pharmacy, Guru Nanak Collage of Pharmaceuticals Science Jhajra, Dehradun, Uttarakhand (248007), INDIA.
Gulafshan Parveen Assistant Professor Guru Nanak Collage of Pharmaceuticals Science Jhajra, Dehradun, Uttarakhand (248007), INDIA.

DOI:

https://doi.org/10.55544/jrasb.1.5.9

Keywords:

Paracetamol, Emulsion, Water, oil

Abstract

The objective of this review article is to summarize literature data pertinent to potential excipient effects on intestinal drug permeability and transit. Despite the use of excipients in drug products for decades, considerable research efforts have been directed towards evaluating their potential effects on drug bioavailability. Potential excipient concerns stem from drug formulation changes (e.g., scale-up and post-approval changes, development of a new generic product). Regulatory agencies have established in vivo bioequivalence standards and, as a result, may waive the in vivo requirement, known as a biowaiver, for some oral products. Biowaiver acceptance criteria are based on the in vitro characterization of the drug substance and drug product using the Biopharmaceutics Classification System (BCS). Various regulatory guidance documents have been issued regarding BCS-based biowaivers, such that the current FDA guidance is more restrictive than prior guidance, specifically about excipient risk. In particular, sugar alcohols have been identified as potential absorption-modifying excipients. These biowaivers and excipient risks are discussed here.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

Gohel, M. C., Parikh, R. K., Nagori, S. A., Shah, S. N., & Dabhi, M. R. (2009). Preparation and evaluation of soft gellan gum gel containing paracetamol. Indian journal of pharmaceutical sciences, 71(2), 120–124. https://doi.org/10.4103/0250-474X.54273

da Costa, B. R., Pereira, T. V., Saadat, P., Rudnicki, M., Iskander, S. M., Bodmer, N. S., Bobos, P., Gao, L., Kiyomoto, H. D., Montezuma, T., Almeida, M. O., Cheng, P. S., Hincapié, C. A., Hari, R., Sutton, A. J., Tugwell, P., Hawker, G. A., & Jüni, P. (2021). Effectiveness and safety of non-steroidal anti-inflammatory drugs and opioid treatment for knee and hip osteoarthritis: network meta-analysis. BMJ (Clinical research ed.), 375, n2321. https://doi.org/10.1136/bmj.n2321

Gazal, G., & Al-Samadani, K. H. (2017). Comparison of paracetamol, ibuprofen, and diclofenac potassium for pain relief following dental extractions and deep cavity preparations. Saudi medical journal, 38(3), 284–291. https://doi.org/10.15537/smj.2017.3.16023

Lung, I., Soran, M. L., Stegarescu, A., Opris, O., Gutoiu, S., Leostean, C., Lazar, M. D., Kacso, I., Silipas, T. D., & Porav, A. S. (2021). Evaluation of CNT-COOH/MnO2/Fe3O4 nanocomposite for ibuprofen and paracetamol removal from aqueous solutions. Journal of hazardous materials, 403, 123528. https://doi.org/10.1016/j.jhazmat.2020.123528

Đuranović, M., Obeid, S., Madžarević, M., Cvijić, S., & Ibrić, S. (2021). Paracetamol extended release FDM 3D printlets: Evaluation of formulation variables on printability and drug release. International journal of pharmaceutics, 592, 120053. https://doi.org/10.1016/j.ijpharm.2020.120053

Ikeuchi-Takahashi, Y., Ito, S., Itokawa, A., Ota, M., Onuki, Y., Hidaka, S., & Onishi, H. (2020). Preparation and evaluation of orally disintegrating tablets containing taste masked microparticles of acetaminophen. Die Pharmazie, 75(1), 2–6. https://doi.org/10.1691/ph.2020.9126

Shiino, K., Iwao, Y., Fujinami, Y., & Itai, S. (2012). Preparation and evaluation of granules with pH-dependent release by melt granulation. International journal of pharmaceutics, 431(1-2), 70–77. https://doi.org/10.1016/j.ijpharm.2012.04.031

Woldu, G., Baymot, B., Tesfay, D., & Demoz, G. T. (2021). Evaluation of Aloe elegans Mucilage as a Suspending Agent in Paracetamol Suspension. BioMed research international, 2021, 5058372. https://doi.org/10.1155/2021/5058372

Desta, K. H., Tadese, E., & Molla, F. (2021). Physicochemical Characterization and Evaluation of the Binding Effect of Acacia etbaica Schweinf Gum in Granule and Tablet Formulations. BioMed research international, 2021, 5571507. https://doi.org/10.1155/2021/5571507

Pishnamazi, M., Hafizi, H., Pishnamazi, M., Marjani, A., Shirazian, S., & Walker, G. M. (2021). Controlled release evaluation of paracetamol loaded amine functionalized mesoporous silica KCC1 compared to microcrystalline cellulose based tablets. Scientific reports, 11(1), 535. https://doi.org/10.1038/s41598-020-79983-8

Hamori, M., Nagano, K., Kakimoto, S., Naruhashi, K., Kiriyama, A., Nishimura, A., & Shibata, N. (2016). Preparation and pharmaceutical evaluation of acetaminophen nano-fiber tablets: Application of a solvent-based electrospinning method for tableting. Biomedicine & pharmacotherapy = Biomedecine & pharmacotherapie, 78, 14–22. https://doi.org/10.1016/j.biopha.2015.12.023

Ul Islam, N., Khan, E., Naveed Umar, M., Shah, A., Zahoor, M., Ullah, R., & Bari, A. (2021). Enhancing Dissolution Rate and Antibacterial Efficiency of Azithromycin through Drug-Drug Cocrystals with Paracetamol. Antibiotics (Basel, Switzerland), 10(8), 939. https://doi.org/10.3390/antibiotics10080939

Iwao, Y., Kimura, S., Ishida, M., Mise, R., Yamada, M., Namiki, N., Noguchi, S., & Itai, S. (2015). Preparation and evaluation of highly drug-loaded fine globular granules using a multi-functional rotor processor. Chemical & pharmaceutical bulletin, 63(2), 95–101. https://doi.org/10.1248/cpb.c14-00687

Suzuki, N., Kawahata, M., Yamaguchi, K., Suzuki, T., Tomono, K., & Fukami, T. (2018). Comparison of the relative stability of pharmaceutical cocrystals consisting of paracetamol and dicarboxylic acids. Drug development and industrial pharmacy, 44(4), 582–589. https://doi.org/10.1080/03639045.2017.1405433

Milanovic, A., Aleksic, I., Ibric, S., Parojcic, J., & Cvijic, S. (2020). Tableting of hot-melt coated paracetamol granules: Material tableting properties and quality characteristics of the obtained tablets. European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences, 142, 105121. https://doi.org/10.1016/j.ejps.2019.105121

Yamada, K., Iwao, Y., Bani-Jaber, A., Noguchi, S., & Itai, S. (2015). Preparation and Evaluation of Newly Developed Chitosan Salt Coating Dispersions for Colon Delivery without Requiring Overcoating. Chemical & pharmaceutical bulletin, 63(10), 799–806. https://doi.org/10.1248/cpb.c15-00308

Khan, S., Elshaer, A., Rahman, A. S., Hanson, P., Perrie, Y., & Mohammed, A. R. (2011). Systems biology approach to study permeability of paracetamol and its solid dispersion. International journal of pharmaceutics, 417(1-2), 272–279. https://doi.org/10.1016/j.ijpharm.2010.12.029

Liu, Y., Wang, F., Tan, T., & Lei, M. (2010). Rational design and study on recognition property of paracetamol-imprinted polymer. Applied biochemistry and biotechnology, 160(2), 328–342. https://doi.org/10.1007/s12010-008-8299-8

Wójcicki, J., Samochowiec, L., Lawczyński, L., Szwed, G., & Olszewska, M. (1977). A double-blind comparative evaluation of aspirin, paracetamol and paracetamol + caffeine (finimal) for their analgesic effectiveness. Archivum immunologiae et therapiae experimentalis, 25(2), 175–179

Peacock, G. F., & Sauvageot, J. (2012). Evaluation of the stability of acetaminophen in pluronic lecithin organogel and the determination of an appropriate beyond-use date. International journal of pharmaceutical compounding, 16(5), 428–430.

Madsen, K. G., Olsen, J., Skonberg, C., Hansen, S. H., & Jurva, U. (2007). Development and evaluation of an electrochemical method for studying reactive phase-I metabolites: correlation to in vitro drug metabolism. Chemical research in toxicology, 20(5), 821–831. https://doi.org/10.1021/tx700029u

Jeon, D.; Kim, K.-T.; Baek, M.-J.; Kim, D.H.; Lee, J.-Y.; Kim, D.-D. Preparation and evaluation of celecoxib-loaded proliposomes with high lipid content. Eur. J. Pharm. Biopharm. 2019, 141, 139–148.

Andrews, G.P.; Abu-Diak, O.; Kusmanto, F.; Hornsby, P.; Hui, Z.; Jones, D.S. Physicochemical characterization and drug-release properties of celecoxib hot-melt extruded glass solutions. J. Pharm. Pharmacol. 2010, 62, 1580–1590.

Lee, J.H.; Kim, M.J.; Yoon, H.; Shim, C.R.; Ko, H.A.; Cho, S.A.; Lee, D.; Khang, G. Enhanced dissolution rate of celecoxib using PVP and/or HPMC-based solid dispersions prepared by spray drying method. J. Pharm. Investig. 2013, 43, 205–213

Deniz, A.; Sade, A.; Severcan, F.; Keskin, D.; Tezcaner, A.; Banerjee, S. Celecoxib-loaded liposomes: Effect of cholesterol on encapsulation and in vitro release characteristics. Biosci. Rep. 2010, 30, 365–373.

Guzmán, H.R.; Tawa, M.; Zhang, Z.; Ratanabanangkoon, P.; Shaw, P.; Gardner, C.R.; Chen, H.; Moreau, J.P.; Almarsson, O.; Remenar, J.F. Combined use of crystalline salt forms and precipitation inhibitors to improve oral absorption of celecoxib from solid oral formulations. J. Pharm. Sci. 2007, 96, 2686–2702

jeb, A.; Arif, S.T.; Malik, M.; Shah, F.A.; Din, F.U.; Qureshi, O.S.; Lee, E.-S.; Lee, G.-Y.; Kim, J.-K. Potential of nanoparticulate carriers for improved drug delivery via skin. J. Pharm. Investig. 2019, 49, 485–517.

Asgharkhani, E.; Fathi Azarbayjani, A.; Irani, S.; Chiani, M.; Saffari, Z.; Norouzian, D.; Akbarzadeh, A.; Atyabi, S.M. Artemisinin-loaded niosome and pegylated niosome: Physico-chemical characterization and effects on MCF-7 cell proliferation. J. Pharm. Investig. 2018, 48, 251–256.

Chen, S.; Hanning, S.; Falconer, J.; Locke, M.; Wen, J. Recent advances in non-ionic surfactant vesicles (niosomes): Fabrication, characterization, pharmaceutical and cosmetic applications. Eur. J. Pharm. Biopharm. 2019, 144, 18–39.

Lu, G.W.; Hawley, M.; Smith, M.; Geiger, B.M.; Pfund, W. Characterization of a novel polymorphic form of celecoxib. J. Pharm. Sci. 2006, 95, 305–317